How To Pre-install SATA Driver In Windows 7 Easy Fix Solution

How To Pre-install SATA Driver In Windows 7 Easy Fix Solution

Don’t suffer from Windows errors anymore.

  • Step 1: Open the ASR Pro software
  • Step 2: Click on "Start scan"
  • Step 3: Click on "Repair now" to start the repair process
  • Fix your computer now with this quick and easy download.

    Create Updated Windows 7 Installation Media

    How do I install SATA drivers?

    Start your laptop.Insert the Windows XP installation CD into your optical CD/DVD drive.Press F6 Important when prompted.Press the very important S to specify an additional device.Insert any SATA driver disk into its own slot A.Followfollow the instructions on the screen.

    This guide focuses primarily on Windows 7, which is only supported on up to 6th generation Intel hardware. It is recommended to integrate drivers and updates for Intel hardware up to and including the 6th generation.

    How Much Memory Do Controller Drivers Have?

    how to pre install sata driver in windows 7

    Storage controller drivers. are required in order for Windows to recognize the storage controller and therefore create Windows on the SSD or HDD during installation.

    How do I download a SATA AHCI controller driver?

    While holding down the Windows key on your keyboard, press R.Log in with devmgmt.Expand the IDE ATA/ATAPI Controllers group.Right-click on each of the paid items in this category and then simply click on Update Driver.

    These drivers are called F6FLPY SATA drivers for historical reasons, since they could only be loaded from a floppy disk by pressing F6 when installing Windows XP.

    In Windows, you need to prepare the installation and load the F6FLPY SATA drivers, otherwise Windows will not see the drive

    i.e. you will get this screen:

    This screen can also be a consequence, but be careful as this window also shows if the Windows installation media is corrupted, usually due to an incomplete boot or a bad DVD/ USB:

    how to pre install sata driver in windows 7

    In some other cases, the actual drive is shown during installation, but Windows doesn’t change in the last step.

    The Windows setup documents contain a set of pre-installed drivers that in many cases do not need to be downloaded separately. Generally, if your company’s system hardware is much newer in terms of Windows installation media, or if your company uses an advanced configuration option such as an SSD as a cache drive, or an advanced format hard drive on an older system, you may need to insert SATA drivers. If your hardware is definitely older than what’s in the Windows Install Store, you’ll most likely get the SATA drivers from the Windows installation media.

    Where are SATA drivers stored?

    The SATA controller driver should usually be found on the CD or on the website of the manufacturer of the system, motherboard, or SATA controller card. If the SATA controller is recognized at the time of installation without special drivers, anyone can complete the installation.

    Therefore, this guide focuses mainly on Windows 7.

    • Windows 7 “Skylake” End of Life Media 2016 Media Update –
      • Windows 7 withService Pack 1 (SP1) – End of Life Media Update 2011
      • Windows 7 SP0 End of Life 2009

    A completely outdated version of Windows, not worth mentioning right now, but damn it:

    • Windows Vista SP2 – 2009 End of Life
    • Windows Vista SP1 End of Life 2010
    • Windows Vista SP0 – 2007 End of Life

    Because Windows XP has reached the end of its lifespan, I don’t recommend using Windows XP at all, especially in a very non-virtual environment… For Windows XP, the exact procedure for loading pre-install drivers through the physical hardware required a floppy disk, and one had to press F6 at the start of make , hence the name F6-FLPY. Slipstreaming with nLite was no easier and required a floppy drive, see more details here.

    • Windows XP SP3 End of Life 2008
    • Windows XP SP2 End of Life 2006
    • Windows XP SP1 – 2002 End of Life

    How do I install AHCI drivers on Windows 7?

    Create a bootable Windows 7 USB drive. Insert the Windows 7 DVD into your DVD drive. Download and set up Win2Flash.Install Windows 7 and create partitions. Reboot and enter BIOS.Install AHCI drivers in Windows 7. Check out other AHCI driver installation guides available online:

    If you don’t have access to this particular OS and are in the process of installing, skip this step and try the list of 5 Intel drivers (one at a time).from newest to oldest). If you can still access the old operating system, left click on the “Try Now” button, then right click on “Computer” and hence select “Properties”:


    This projection screen will tell you whether your Windows series is 64-bit or 32-bit, and whether your company’s processor is Intel or AMD. If you have an Intel processor (on most Dell systems), you have an Intel storage controller, and if your processor is considered AMD, you have an AMD storage controller.

    Select Device Manager on the left:


    Device Manager creates, extends IDE ATA/ATAPI controllers, and optionally selects the listed devices. In this edition of Standard AHCI SATA Controller:

    Right click and select Properties:

    Select details:

    Then change the property from “Device Description” to “Hardware IDs”:

    VEN_8086 means &DEV_xxxx Apple is your specific device.

    On this page, press [ctrl] [ and y ] and find your hardware ID on the page.

    Don’t suffer from Windows errors anymore.

    ASR Pro is the ultimate repair tool for your PC. Not only does it diagnoses and repairs various Windows issues, but it also increases system performance, optimizes memory, improves security and fine tunes your PC for maximum reliability - all with a simple download and install. Trust ASR Pro to get your PC back up and running in no time!

  • Step 1: Open the ASR Pro software
  • Step 2: Click on "Start scan"
  • Step 3: Click on "Repair now" to start the repair process

  • If my program is PCIVEN_8086&DEV_1c02

    All of the many Windows drivers have been removed by Intel since Windows 7 reached life. (6th-7th Gen)
    Intel® SATA 200 Series Chipset AHCI/RAID Controller (PCIVEN_8086&DEV_A282)
    Intel® Core Processor Family Platform™ 7th Gen SATA I/O AHCI/RAID Controller (PCIVEN_8086&DEV_A102)
    Chipset Intel® SATA 100/C230 Series AHCI/RAID Controller (PCIVEN_8086&DEV_A103)
    Intel® Core™ Processor Family Platform Controller I/O Gen 6 SATA AHCI/RAID (PCIVEN_8086&DEV_9D03) (Gen 4-5)
    Intel(R) SATA AHCI 9 Series Controller (PCIVEN_8086&DEV_8D02)
    Intel(R) AHCI SATA 9 Series Controller – Chipset Family (PCIVEN_8086&DEV_9C83) Intel(R) AHCI SATA Chipset Family 9 Controller (PCIVEN_8086&DEV_9C82)
    Intel(R) AHCI SATA Chipset Family 9 Controller (PCIVEN_8086&DEV_8C83)
    Intel(R) Chipset Family 9 (PCI) Controller VEN_8086&DEV_8C82) )
    AHCI SATA Controller for Intel(R) 8 Series Chipset (PCIVEN_8086&DEV_9C03)
    AHCI SATA Controller for Intel(R) 8 Series/C220 Chipset (PCIVEN_8086&DEV_9C02)< br> Intel Series (R) 8 SATA AHCI Controller Chipset Family (PCIVEN_8086&DEV_8C03)< br> Intel(R) 8 Series/C220 SATA AHCI Chipset Family ( PCIVEN_8086&DEV_8C02)


    Fix your computer now with this quick and easy download.